BPH100 Heat Exchanger Module

A small footprint Water/Water or Water/Propylene Glycol Solution heat exchanger. Eliminates the need for piping on the manifold side with easy to connect circulator pump fittings. It lines up perfectly with Rhella 1″ trunk manifolds from 2-12 loop sizes (sold separately)

Included are:

• BPH100 heat exchanger
• Rhella T20-20-20UC circulator pump
• All connection hardware

Number of Plates:	40
Max. flow rate:	4 m³/h (17.6 GPM)
Flow direction:	Parallel
Plate thickness:	0.4 mm (0.016 inches)
Heat exchanger area:	0.60 m₂ (6.54sq.ft)
Maximum pressure:	1.0 Mpa (150 psi)
Test pressure:	2.0 Mpa (300 psi)
Volume per channel:	0.029 L
Brazing material:	99.9% copper
Material:	304 Stainless Steel
Operating temperature:	-250°C to 220°C (-50°F +250°F)